AR-ARX38D

AARC-EVAC™ Receiver/Message Broadcast Units for PA System Audio Input

The AARC-EVAC™ Wireless Linked Emergency Alert Receiver Message Player Unit for PA Systems outputs standard Evacuation & Alert sirens, “Lock Down”, an Evacuation Drill message plus several unique “S.O.S.” assistance zoned messages when triggered by a wireless linked Remote Transmitter. These master units also have an integrated set of push-button switches that can also be used to trigger the alarms, plus an evacuation drill message button. The units also have a Cancel button which is used to cancel all siren and audio messages plus any visual alert beacons deployed in the system.

FEATURES

• Unit is triggered by wireless signals received from an ATX2 (Hand Held) or

ATX3 (Wall Mount) series remote transmitter.

• The Unit can also be triggered by a wireless signal received from an

AARC-EVAC Wireless Signal Repeater Unit.

• Voice messages can be multilingual.
• A wireless “Cancel” activation or pressing the front panel “Cancel” button

will stop any active alert and reset the system.

• When a “Lockdown” is triggered, in addition to the Lockdown message

being played, a switched output Aux Out 2 is provided on the rear panel

which can be factory configured to activate a Lockdown device

(e.g. Door Locking Solenoid or interface to an Access Control System).

This is a latching output and will remain active until a system “Cancel” signal

is received.

• It is recommended that a suitable UPS (Uninterruptible Power Supply) be used

in conjunction with this unit and the PA Amplifier.

• Designed and Manufactured in Australia.

SPECIFICATIONS

• Power Supply: 240VAC to 12VDC Adaptor
• Antenna: TXANT433N AARC EVAC Antenna 4.5dBi with Mounting Bracket,

3.6mtr Coax Cable fitted with SMA male connector

• Antenna Length: 325mm
• Switched Outputs: Aux Out 1; Evac Out; Aux Out 2 (factory configurable)
• Audio Outputs: 2 X RCA Stereo Line Out 500mV
• Switched Input: Aux Input (factory configurable – provide static or

active switching of any channel)

• Size: 1U Rack Mount Case: 481mm x 215mm x 43mm (inc. mounting Brackets)

Standalone Case (Optional): 431mm x 215mm x 43mm

Note:It is recommended that a suitable UPS (Uninterruptable Power Supply)
be used in conjunction with this unit and the P.A. Amplifier to ensure operation
in the event of a power failure.